Northwest of Edmonton
Flake floors in St. Albert.
Final Finish Epoxy installs flake floor coatings in St. Albert. Denis drives out from Edmonton, about 20 minutes via St. Albert Trail or Anthony Henday Drive, to assess the slab, grind it, and build the floor. The estimate is free and can start from photos.
St. Albert
Flake floors for St. Albert.
St. Albert is close enough to Edmonton that a garage here is planned exactly like one in the city.
St. Albert is its own city on the Sturgeon River, directly northwest of Edmonton. Most homes are detached, and most of them come with an attached garage.
The older neighbourhoods have slabs that have seen decades of winter salt and meltwater at the door. The newer areas on the north and west sides have younger concrete with less wear, but the same cold-weather use.
The floors are flake, and we use Torginol products. Photographs of real Final Finish floors are in the project archive.
The work
What we coat in St. Albert.
These are the floors that come up most often here. Each one starts with the condition of the concrete.
- Attached two- and three-car garages that park vehicles all winter.
- Older slabs with salt scaling or an old roll-on coating to grind off.
- Garages that double as a home gym or workbench space.
- Basement rooms with a sound, dry slab.
Garages are covered on the garage flake floors page, houses on residential flake floors, and shops and working rooms on commercial flake floors.
Getting there
St. Albert from Edmonton.
St. Albert is 13 km northwest of central Edmonton in a straight line, 15 km by road, about 20 minutes via St. Albert Trail or Anthony Henday Drive in normal driving conditions.
St. Albert is its own city, beside Sturgeon County.
Photos are the quickest start. Denis can often scope the floor from a wide shot and a few close-ups, then confirm the visit date on the call.
The process page is the order of work. Installation usually runs two days, and it varies with the concrete underneath.
Questions
St. Albert flake floor questions.
Short answers. Price, cure time and warranty terms are written into your quote, not guessed at here.
Is St. Albert part of the regular service area?
Yes. St. Albert sits right beside Edmonton, about 20 minutes from the city centre, and it is quoted and scheduled the same way an Edmonton garage is.
My St. Albert garage has an old coating that is peeling. Can it go flake?
Usually, but the old coating has to come off first. Diamond grinding removes loose material and opens the concrete, and anything that turns up under it changes the scope. Denis says so when he sees it, before work starts.
How far is St. Albert from Edmonton?
St. Albert is 15 km from central Edmonton by road, about 20 minutes via St. Albert Trail or Anthony Henday Drive.
What kinds of floors do you install in St. Albert?
Flake floors. Every install is the same order of work: grinding, cosmetic crack filling, a broadcast of Torginol flake, a scrape, and a top coat, with an anti-slip top coat where a room needs grip.
Next step
Send photos for a free estimate.
Tell Denis where the floor is, roughly how big it is, and what is on it now.
Call (780) 991-1651 or email finalfinishepoxy@gmail.com.
Nearby:

