Northwest of Edmonton
Flake floors in Barrhead.
Final Finish Epoxy installs flake floor coatings in Barrhead. Denis drives out from Edmonton, about an hour and 40 minutes via Highway 16 west and Highway 33, to assess the slab, grind it, and build the floor. The estimate is free and can start from photos.
Barrhead
Flake floors for Barrhead.
Barrhead is a town northwest of Edmonton in farming and acreage country.
Barrhead is a town inside the County of Barrhead, about 120 km northwest of Edmonton by road.
Farms, acreages and shops make up much of the area, along with the garages in town.
The floors are flake, and we use Torginol products. Photographs of real Final Finish floors are in the project archive.
The work
What we coat in Barrhead.
These are the floors that come up most often here. Each one starts with the condition of the concrete.
- Acreage garages and detached shops.
- Farm shops that see equipment and fluids.
- Attached garages in town.
- Basement rooms with a sound, dry slab.
Garages are covered on the garage flake floors page, houses on residential flake floors, and shops and working rooms on commercial flake floors.
Getting there
Barrhead from Edmonton.
Barrhead is 88 km northwest of central Edmonton in a straight line, 120 km by road, about an hour and 40 minutes via Highway 16 west and Highway 33 in normal driving conditions.
Barrhead is its own town, within the County of Barrhead.
Photos are the quickest start. Denis can often scope the floor from a wide shot and a few close-ups, then confirm the visit date on the call.
The process page is the order of work. Installation usually runs two days, and it varies with the concrete underneath.
Questions
Barrhead flake floor questions.
Short answers. Price, cure time and warranty terms are written into your quote, not guessed at here.
How do you handle a trip to Barrhead?
Barrhead is a highway trip, about an hour and 40 minutes from Edmonton. Photos come first, then Denis confirms visit timing on the call.
Can an old shop floor in Barrhead be coated?
If the concrete is sound. Grinding opens the slab, cracks are filled, and oil-soaked or damaged areas are assessed before the scope is set.
How far is Barrhead from Edmonton?
Barrhead is 120 km from central Edmonton by road, about an hour and 40 minutes via Highway 16 west and Highway 33.
What kinds of floors do you install in Barrhead?
Flake floors. Every install is the same order of work: grinding, cosmetic crack filling, a broadcast of Torginol flake, a scrape, and a top coat, with an anti-slip top coat where a room needs grip.
Next step
Send photos for a free estimate.
Tell Denis where the floor is, roughly how big it is, and what is on it now.
Call (780) 991-1651 or email finalfinishepoxy@gmail.com.
Nearby:

